Renovation Videos

Fix it, build it, learn it.

Angle grinder

An angle grinder cutting concrete.

Photo: Asurnipal / CC BY-SA 4.0

Events

  • 1 video
    • Mr. Build It
  • DIY Lean-To Shed

    A lean-to is one of the simpler sheds to build. One wall already exists, so you frame three walls, a ledger board and a shed roof.

    2 videos
    • Modern Builds
  • Shed to Workshop Conversion

    Mike Montgomery of Modern Builds starts with a shed that has decent bones but a lot of problems: a worn floor, a wall and door close to falling off, a failing roof and nothing inside.

    4 videos
    • Modern Builds

Videos

  1. Replacing a Cracked Tub With a Delta 500 and NexTile Walls

    Step by step how toModern Builds · 25:41
  2. Epoxy, Flake and Polyaspartic Garage Floor: A DIY Walkthrough

    Project buildTim Seay (@TimDCVA) · 14:48
  3. Epoxy Garage Floor: Grind, Prime, Roll and Seal a 750 sq ft Slab

    Step by step how toMike Day Concrete (Everything About Concrete) · 8:59
  4. Kitchen Tile Backsplash: Pre-Cut Method, Cost and Six-Day Timeline

    Step by step how toHandyman Startup · 19:23
  5. Hexagon Mosaic Backsplash: Prep, Tile, Grout and Seal Steps

    Step by step how toModern Builds · 20:03
  6. DIY Kitchen Remodel: Heated Tile Floor, Cabinets and Counters

    Step by step how toAndrew Thron Improvements · 53:28
  7. Replacing a Shed’s Asphalt Roll Roof With Corrugated Metal

    Series partModern Builds · 9:53

    Project: Shed to Workshop Conversion

  8. Lean-To Shed: Plywood Walls, Metal Roof and Trim Finish

    Series partModern Builds · 12:28

    Project: DIY Lean-To Shed

  9. Rebuilding a Tiny Basement Shower on a Concrete Slab With Tile

    Project buildMr. Build It · 18:56

    Project: Basement Shower Makeover

  10. Mitered Baseboard Install: Cutting 44° and 46° Corners in a Rental

    Step by step how toVancouver Carpenter · 41:54