Renovation Videos
Fix it, build it, learn it.
Every project we cover, with its parts in order.
Published: 7 Oct 2026
Tom Silva guides homeowners Melissa and Mark through finishing a 20 by 20 deck.
Published: 24 Apr 2026
The creator builds a U-shaped outdoor patio sectional from Douglas fir, aiming to copy a $12,000 design for about $1,000.
Published: 10 Dec 2025
The creator turns his son's builder-grade closet into a custom built-in with cabinets, drawers, a desk with a laminated butcher block top, overlay doors, trim and a hidden drawer.
Published: 2 Oct 2025
A homeowner builds a his-and-her built-in closet on a blank wall in a master bathroom, using a 2x6 base, 3/4 in. plywood boxes joined with pocket holes, IKEA dressers, and 2 in. primed pine trim.
Published: 9 Feb 2025
A full bathroom remodel on a stated budget under $2,500, with the cost given as $2,433.69 in the title and $2,443 in the closing tally.
Published: 15 Jun 2024
A host installs click-lock vinyl plank flooring with a stone polymer core throughout his double wide trailer, about 1,350 square feet with no transitions.
Published: 25 May 2024
Final installment of a laundry room makeover in which upper cabinets are built: open shelving and doors under a soffit, plus three cabinets above the washer and dryer.
Published: 1 May 2024
A comparison of a store-bought closet organizer assembled in just over 3 hours against a custom plywood closet tower built from scratch for a deeper 38 in. closet.
Published: 14 Apr 2024
MWA Woodworks shares 12 workshop organization ideas: friction-fit plywood drawer dividers, deli containers for fasteners, sliding trays, a drill charging station, grab-and-go storage, a slide-out…
Published: 6 Jan 2024
A ground-level 8 by 12 ft deck is built on CAMO blocks with pressure-treated 2x8 joists and Trex composite boards.
Published: 19 Oct 2023
A whole-house luxury vinyl plank installation with no transitions, running over old hardwood, an LVP underlayment over plywood subfloor, and bathroom tile.
Published: 10 Dec 2022
Part 1 of a two-part laundry room build shows how to make cabinet boxes from pre-finished maple plywood, using dados, glue and pocket holes, plus a nook, clothes hanger and separate toe kicks.
Published: 14 Sep 2021
A woodworker walks through his overhead dust collection system that runs a whole shop from one 2 hp, 220V collector.
Published: 7 May 2021
Shows how to build a DIY walk-in closet from 3/4 in. MDF shelves with MDF strip supports instead of brackets.
Published: 17 Mar 2021
Adam Savage replaces ribbed hoses on his shop dust collector with straight tubing, adds a longer run to the far end of the shop, and installs drop-down pickups, including a vacuum hose.
Published: 8 May 2020
The creator turns unfinished basement stairs into finished ones for under $200 over 3 days.
Published: 27 Feb 2020
Mr. Build It builds plywood built-in shelves for the area under a staircase, using 3/4 inch maple plywood, mitered face frames and wood glue.
Published: 11 Mar 2019
A woodworker builds a vertical dust collection cart from 3/4 in. Baltic birch plywood to hold a shop vac with an Oneida Dust Deputy cyclone and bucket on top.
Page 1 of 1