Renovation Videos

Fix it, build it, learn it.

All projects

Every project we cover, with its parts in order.

Filters1

Filter videos

Room
All rooms
Room
Problem
Any problem
Problem
Skill level
Any skill level
Skill level
  1. Gutter Leaking Behind It? Drip Edge, Overhang and Pitch Explained

    Published: 1 Nov 2026

    General contractor Tom Silva shows host Kevin O'Connor why water can run between the house and the gutter.

  2. Ice Dam Heat Cables, Furnace Upkeep and Snow Blower Care

    Published: 8 Oct 2026

    A winter-weather episode of Ask This Old House covering ice dams, where an electrician installs a 60-foot electric heat cable with a temperature and moisture sensor on a roof, gutter and downspout.

    Call a pro?
    Permit or a pro may be required
  3. Blocked Soffit Vents: How to Check and Fix Attic Ventilation

    Published: 3 May 2026

    Explains how a ridge-and-soffit attic ventilation system is supposed to work and why blocked soffit vents are the common failure.

    Call a pro?
    DIY is fine
  4. Extending a Shed Roofline 10 Feet With 6×6 Posts and Spliced Shingles

    Published: 25 Oct 2025

    Scott of Everyday Home Repairs extends the roofline of a 12x16 modern single-slope shed by about 10 feet, as part of the Solar Shed 2.0 project.

    View project: Solar Shed 2.0
    Call a pro?
    DIY is fine
  5. Lean-To Shed: Plywood Walls, Metal Roof and Trim Finish

    Published: 1 Aug 2025

    The second part of a 4 ft x 8 ft lean-to shed build against a shed workshop covers sheathing the walls with 3/8 in. plywood, decking the roof with 3/4 in. plywood, and covering it with corrugated…

    View project: DIY Lean-To Shed
    Call a pro?
    DIY is fine
  6. Installing 6 in Gutters and Downspouts in Sections on a Metal Roof

    Published: 27 Oct 2024

    A DIY walkthrough of installing 6 in gutters in pieces on a 62 ft metal-roofed house, including chalking a slope line, cutting the outlet hole, sealing and riveting end caps and overlap joints,…

    Call a pro?
    DIY is fine
  7. Replacing a Shed’s Asphalt Roll Roof With Corrugated Metal

    Published: 17 Mar 2021

    In episode three of a shed-to-workshop conversion, the creator replaces a failing asphalt roll roof with 29 gauge corrugated galvanized steel panels.

    View project: Shed to Workshop Conversion
    Call a pro?
    DIY is fine
  8. Hanging a Rain Gutter, Downspout and Rain Barrel Step by Step

    Published: 22 Feb 2016

    Tom Silva of This Old House shows a homeowner how to install a 24 gauge aluminum gutter on a low roof edge, then add a downspout with elbows and a rain barrel with a diverter.

    Call a pro?
    DIY is fine