Renovation Videos

Fix it, build it, learn it.

All projects

Every project we cover, with its parts in order.

Filters1

Filter videos

Room
All rooms
Room
Problem
Any problem
Problem
Skill level
Any skill level
Skill level
  1. Shed Interior Walls With OSB: Cutting Around Boxes and Doors

    Published: 5 Feb 2026

    Scott of Everyday Home Repairs shows how to cover insulated shed walls with 5/8 in. OSB instead of drywall.

  2. Insulating a Shed Ceiling With Rigid Foam and Vented Rafter Bays

    Published: 3 Dec 2025

    Scott of Everyday Home Repairs insulates the ceiling of a 12x16 shed being converted to an office using 2 in. rigid foam board fixed to the underside of the rafters.

    Call a pro?
    DIY is fine
  3. Extending a Shed Roofline 10 Feet With 6×6 Posts and Spliced Shingles

    Published: 25 Oct 2025

    Scott of Everyday Home Repairs extends the roofline of a 12x16 modern single-slope shed by about 10 feet, as part of the Solar Shed 2.0 project.

    View project: Solar Shed 2.0
    Call a pro?
    DIY is fine
  4. Shed Framing: 5 Mistakes DIYers Make, From Foundation to Corners

    Published: 4 Sep 2025

    Scott of Everyday Home Repairs outlines five common beginner mistakes when framing a DIY wood shed, using his 12x16 lean-to shed as the example.

    Call a pro?
    DIY is fine
  5. Fixing a Notched 2×8 Floor Joist With a Repair Strap

    Published: 8 Jul 2025

    A 2x8 floor joist was flagged in a homeowner's inspection for a notch of about 5 in. by 3 in. that removes its ability to carry tension at the bottom.

  6. Plastic vs Metal Storage Sheds: Assembly Time, Headroom, Anchoring

    Published: 27 Jun 2025

    Scott assembles a plastic (resin) Suncast-made Craftsman shed and a metal shed to compare them.

    Call a pro?
    DIY is fine
  7. Anchoring to Concrete: Titan HD Anchors and a Rotary Hammer Drill

    Published: 6 Jun 2025

    Scott of Everyday Home Repairs explains how to anchor into concrete without failures, using a solar tracker base with 16 anchor holes as the demo.

    Call a pro?
    DIY is fine
  8. Furnace Burners Light Then Shut Off: Cleaning the Flame Sensor

    Published: 15 Sep 2022

    A furnace that lights its burners for two or three seconds and then shuts off is often failing at the flame detection step of the six-step startup sequence.

  9. Replacing a Two-Way Light Switch: Safe Side Wiring Step by Step

    Published: 17 Aug 2021

    A step-by-step guide to replacing a standard two-way light switch in a box that also holds a three-way switch.

    Call a pro?
    Permit or a pro may be required
  10. Garbage Disposal Humming or Stuck? Troubleshoot, Then Replace

    Published: 25 Jul 2020

    A new-property owner troubleshoots a garbage disposal that does not spin, starting with checking outlet power, then the built-in reset breaker, then turning the motor with an allen wrench.

    Call a pro?
    DIY is fine
  11. Door Won’t Latch? Three Fixes From Hinge Screws to Washers

    Published: 21 Mar 2020

    Three fixes for an interior door that won't latch because the latch and latch plate are misaligned.

    Call a pro?
    DIY is fine